BT CALLER DISPLAY 60 Guide de l'utilisateur télécharger pdf (Page 67)

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp

Help

Phone does not work

• Have you installed the batteries correctly? See page 8.

• Check that the mains power is correctly connected.

No dial tone

• Is the telephone cord of the base plugged into the phone socket?

• Check that the mains power is correctly connected.

• Only use the telephone cord supplied with the phone.

Cannot dial out or receive calls

• Check that the mains power is correctly connected.

• The batteries may need recharging.

• Has there been a power cut? If so, place the handset back on the base f or 10 seconds and tr y

again. If it still does not work disconnect the batteries and mains power for 10 minutes, then

reconnect and try again.

You have a dial tone, but the phone will not dial out

• You may need to change the dial mode from tone to pulse, see page 35.

• If you are connected to a switchboard, check whether you need t o dial an access code.

Handset does not ring

• The ringer volume may be switched off, see page 31.

• Check that the mains power is correctly connected.

• Make sure the handset is registered to the base, see page 63.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 77 78

Pas de commentaire

BT CALLER DISPLAY 60 Guide de l'utilisateur Page 67