BT VP1000 Guide de l'utilisateur télécharger pdf (Page 42)

SHOW / OK

OFF

HOME

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

SELECTING A SENSOR SIGNAL

Decide if you want the sensor to make a sound

when triggered, when the system is switched off.

One useful application is to configure a sensor

on or near your front door to CHIME when it is

opened, so you know when someone has entered

your house.

Note that the chime function must be activated

by pressing the number 8 button on the Control

Panel keypad.

PRESS DISPLAY

Display shows

S (number): CHIME.

Choose by scrolling through:

1. Chime Off.

2. Melody Chime.

3. Sensor Name.

Display shows

SENSOR NO:(number).

Choose either:

To move to the next sensor.

Three times then <OK> to exit

to return to READY.

DELETING A SENSOR

You may at some point decide you do not wish

to use one or more of your wireless sensors. To

delete a sensor from the Control Panel, follow

these instructions:

PRESS DISPLAY

Until the display shows

SYSTEM PROFILE.

Enter your MASTER CODE –

if you have not selected a

personal PIN number, this will

be the default setting – 2580.

Display shows

ADD / DEL SENSOR.

Display shows SENSOR NO:--

Enter the Sensor number for

the sensor you wish to delete

e.g. 04 or press NEXT to scroll

through the list.

Display shows

S (number): DELETE.

Display shows <OK> TO CLEAR.

Display shows

SENSOR NO (number).

Choose either:

To move to the next sensor.

Three times then <OK> to exit

to return to READY.

You may also wish to remove the battery.

SHOW / OK

HOME

SECTION 5

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

BT VP1000 Guide de l'utilisateur Page 42

Commentaires sur ces manuels